Results 1 to 3 of 3

Thread: 5.0 distributor - pick up coil

  1. 5.0 distributor - pick up coil

    Does anyone know how to test the PIP or pick up coil in the distributor? I have a volt-ohm-meter, but I'm not sure how to test this thing.

    I'm getting no spark from it, has new; coil, plugs, wires, cap&rotor, and I've taken the TFI to autozone and they tested it 3 times and it's working properly. So, the only thing I can think of is the PIP in the distributor.

    Thanks for any help!

  2. #2

    Join Date
    Aug 2005
    Have you pulled codes to see if the computer is telling anything?

    I dont have anything on how to test the PIP alone. In this article, it says that testing it is very difficult and its best just to replace it if the TFI Mod is good.

  3. #3

    Join Date
    Aug 2005
    San Antone
    take a test lite and hook it to a good ground, then probe the coil and see if it pulses on and off as yer crankin it...

Similar Threads

  1. accel coil vs screaming demon coil
    By Mustang Timmy in forum General Tech
    Replies: 4
    Last Post: 01-22-2008, 08:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts