Larry03gt's Mods

[Larry03gt]

Ok I'm going to list some of the mod's done to my car.


SHM Stage 1 cams
180% thermostat
TR55 NGK V power spark plugs Gaped at .058
BBK high flow upper intake
BBK 75mm TB
BBK CAI
Steeda strut tower brace
Brembo crossed drilled rotors
Hawk Racing brake pads
Aluminum Rack & Pinion Bushings
Ford Racing C Springs
Flowmaster super 40 mufflers
Ford racing 410 gears
Tri-ax Short throw shifter
Ford Racing Aluminum Driveshaft
Dog bone delete kit
Pair of 275/40 R17 Mickie Thomson's DR tires on extra pair of factory rims (for the track :D )
VIS carbonfiber 03 Cobra heat extractor hood
BBK upper and lower rear control arms
BBK underdrive pullies
BBK Tuned Shorty Headers
BBK O/R 2.5 X-pipe
Fidanza Aluminum Flywheel
Zoom Stage II racing clutch.
BBK Clutch quadrent and Ajs cable
Custom tune by Mike Murillo

[XCELER8]

not bad bro.... not bad....

[Roots66]

That's it? :snicker:

[Larry03gt]

Just a little update to the list. :mick:

[FoxracerMenace]

That's it? :snicker:
He did say some...

[2k4mk1]

And I can still beat ya..............













I Think.

[FoxracerMenace]

:ohsnap:

A callout

[Larry03gt]

And I can still beat ya..............













I Think.

Lets see I beleve we have run each other two or three times and....... :snicker:

[2k4mk1]

Lets see I beleve we have run each other two or three times and....... :snicker:

From a Roll............... :snicker:
At the Track...........:D

[Larry03gt]

Well had to update it again (Don't you Hate when that happens! :snicker: )

[txlen]

Well had to update it again (Don't you Hate when that happens! :snicker: )


hmm...i think i can beat ya...wadda ya think???....i'm not modded....MUCH.... :lmao:

[Bulldog Stang]

Larry,

What is the Dog Bone Delete ??
Why did you go with the 180 Degree Thermostat ??
And what does the gaping to .058 do ????

[XCELER8]

Hey larry, keeping adding... The mach has owned it once, and shall own it again!

[XCELER8]

nice mods btw...

[Larry03gt]

Larry,

What is the Dog Bone Delete ??
Why did you go with the 180 Degree Thermostat ??
And what does the gaping to .058 do ????


Dog Bone delete is the big metal thing hanging from your Diff. You remove that but put back the bump stop plate on the top of it. (I would have to show you)

180% keeps it cool for racing but also keeps your emisions down.

Using copper plugs gaped at .058 gives you a hotter spark.

[Bulldog Stang]

Dog Bone delete is the big metal thing hanging from your Diff. You remove that but put back the bump stop plate on the top of it. (I would have to show you)

And why would you want to do that ?? Weight Removal ?? Dont you want the weight in the rear of the car to make it stick better ??? Hence the Battery Relocation thing (my next thing after the rear end job)

[Larry03gt]

And why would you want to do that ?? Weight Removal ?? Dont you want the weight in the rear of the car to make it stick better ??? Hence the Battery Relocation thing (my next thing after the rear end job)

Actually taking the weight off the front of the Diff helps put more traction to the ground. And thats the last one of my secrets I'm giving away!! :snicker:

[txlen]

dang Larry....hush up!!..they can't get to know all the secrets!!...it's takes years of testing and trying stuff to get to where we are now..remember....i'm an old man!!! :mick:

[Bulldog Stang]

I thought we were all here to help each other ???? LOL ... Damn secret HOGS!!!!!



so is this a kit you buy or do you just remove it ??? I have heard to just remove the whole thing... is this right ???

[Larry03gt]

I thought we were all here to help each other ???? LOL ... Damn secret HOGS!!!!!



so is this a kit you buy or do you just remove it ??? I have heard to just remove the whole thing... is this right ???


No you can not just remove the whole thing there is a little secret to it so don't tell everyone!!! :snicker: What you you want to do is pull out one of the bolts from the dog bone is about 6" long then you go to your local hardware store and buy the same thread size bolt but only 2" long. Then remove the dog bone and reinstall the plate that goes on top with the new bolts and your done!! :mick:

[Bulldog Stang]

No you can not just remove the whole thing there is a little secret to it so don't tell everyone!!! :snicker: What you you want to do is pull out one of the bolts from the dog bone is about 6" long then you go to your local hardware store and buy the same thread size bolt but only 2" long. Then remove the dog bone and reinstall the plate that goes on top with the new bolts and your done!! :mick:


sweet .. so keep the plate, get new bolts 2" long ... Got it!!! :mick: :mick: :mick:

[fini]

nice mods

[Larry03gt]

Damm had to do more updates. :snicker:

[Aviator Stang]

I am just waiting for more cash flow and my stang will start getting set up.