Project BOSS reincarnation bas begun!!!!

[badasspony]

Ok well since before my 84 was delivered I have been putting together the parts for the build. The BOSS was moved to a buddies shop where the reincarnation will happen. Heres alittle bit of whats going into this build.

306 GT40P motor
TF Stage 1 cam
1.6 Scorpion roller rockers
Edelbrock Performer RPM air gap TMOSS ported
Holley 650 DP mechanical secondary
Fabbed aluminum valve covers
Billet alternator and PS brackets
Edelbrock water pump
Mac P shorty headers
Mac Pro chamber
Mac Pro dumps
UPR Pollished underdrive pulleys
Motorsport 9mm wires
Mallory HyFire 6 ignition
Mallory coil
UPR quadrant, firewall adjuster, cable
Fresh built T5
MGW shifter
FRPP King Cobra clutch
FRPP aluminum DS
New TCI Line lock

Thats most of the stuff for now. There is alot more in the works, but that gives you an idea. This will be a highly impressive Pony when its done and will have all the muscle to back it up. Eventually there will be a 347 or bigger going in but I think this will work for now. Ill keep you all posted and add pics and video as the build progresses.:omg::dbp:

[my86gt]

what do you estimate RWHP will be

[badasspony]

I dont know right at this point. The motor was just gone through about 100 or so miles ago and in a 3700lb SN95 ran mid 13s with no traction spinning through first, second, and thrid. I have an appointment March 21st to dyno tune it. Im guessing it should be somewhere in the ball park of 300rwhp. I should be in the 12s on motor then when we add spray should be well in the 11s.

[No1FordGirl]

Sounds like a good project! Good luck with it

[badasspony]

This is some of what the 84 already has,
Sumped tank with a Holley Black pump
Weld Draglites 15x3.5 and 15x8 with 26X 10.5 et streets
Subframe connectors
4 point roll bar
Complete upr pro rear suspension (solid double adj uppers and lowers)
Anti roll bar
Autoguage tach with shift light
Autometer guages oil,water,fuel
Lakewood 90/10's and 50/50's
Moroso drag springs front and back
Eaton center section with 3.73 gears
31 spline Moser axles
Aluminum radiator w/ electric fan

[SHELBY59]

I saw a picture of this car lifting the front wheels off the ground... Sounds like that WON'T be the last time!:awsome:

[Masshole]

sweet dood

[badasspony]

Alittle progress was made on the 84 this weekend. Got the new tach wired up and mounted, got my 306 out of the donor car, got my battery kill hooked upand the saleen wing removed. My motor mounts should be here tuesday or wednesday, the UPR stuff will be here tomorrow. Ill get the UPR stuff in this week along with get the motor painted up and set in the car. By next sunday we should be down to exhaust, wiring and odds and ends stuff. Pics will be coming tomorrow nite.

[mustang4life1985]

That's definitely a sweet 4 eye and I love the sig as well!!! Keep up the good work with it. Share some pics with us on here if you get a chance.

[badasspony]

More progress, I should have the new clutch this week and then the motor will go in. Once its in everything will get wired plummed and ready to fire once the rest of the parts are here.

http://i509.photobucket.com/albums/s333/86droptop/buildpics001.jpg

[ambenz]

You think you'll have it all built before July?
The reason I ask is I will be an hour away from you on July 17th thru the 19th for a Mustang rally in Harrisburg.
Think about comming down to CJ pony parts on Saturday at 9 to 1 and show us your ride.
I will be staying accross the street from CJ's at the Super 8 Motel, 7500 Allentown Blvd, Harrisburg, PA ...party in the parking lot that Saturday night.
Here's a link to the event......
http://www.grabberpony.com/forums/showthread.php?t=301

[badasspony]

I will be done and on the track by the end of this month. Keep me posted and Ill come meet up with you guys.

[badasspony]

Stainless bolt kit, tranny parts and Billet dizzy should be here tomorrow, Prothane trans mount, Motorsport wires, and a couple other small parts came yesterday. The intake, clutch, bell housing will go on the motor saturday and the quadrant, cable and firewall adj. installed......Then the motor will be going in the car saturday nite. The sunday the Alt, starter and wiring will get hooked up and hopefully Ill get my tranny back wednesday and it will go in. By the end of next weekend I should have some video of the initial start up and some tuning, if all goes well ther might even be a road test video next sunday.

[94greenhunter]

sweet can not wait to see the finished procduct

[MRicci]

Can't wait to see the finished product. Its always nice when a project is in the final stages.

[badasspony]

Well as of today, all the plumbing is done except for the lower rad hose and all we have left for the wiring is wiring the 3G which Ill have done tomorrow nite. If all goes well it will be ready to fire tuesday. I still have a couple loose ends to finish up like the quadrant and my line lock/2 step but if all goes well we will get it fired and tuned this week then once I get a tranny Ill have some test drive videos coming. Ill have better pics tomorrow nite but heres a couple teaser cell phone pics. These were taken this morning before we got alot done. The better pics will be coming tomorrow.

http://i509.photobucket.com/albums/s333/86droptop/untitled2.jpg

http://i509.photobucket.com/albums/s333/86droptop/untitled.jpg

One at the end of today.

http://i509.photobucket.com/albums/s333/86droptop/untitled3.jpg

[No1FordGirl]

Awesome! :marc:

Beaver Springs this weekend??

[badasspony]

That was the plan but I dont have a tranny as of right now. But my vert is going to be sold this week and then Ill be on the phone with Hanlon Motorsports to get the tranny. I will be ready for the first points races!!!!

[badasspony]

So close I can taste it!!!!!! Got everything done over the weekend, all thats left is tuning the carb and putting the dumps on when they get here tomorrow or wednesday. Had a minor set back when I found out the bell housing I had was broke and had to buy another one. But we had it running for awhile with just the prochamber and it sounds incredible!!!!

[Booty Queen]

:marc: WOW, THAT IS SOME LIST. MOTOR LOOKS GREAT!