5.0 EBRAKE ADJUSTMENT??

[UBSTANG]

Does anyone know how to adjust the ebrake on a 1987 5.0 lx vert? I have found several different ways to do it online, but they are all different.. One says to reverse and apply the ebrake. One says that there is a set screw in the backside of the drum <each side> and the last one says to remove the center consol and there is a nut in there that tightens them up.. I have the stock rearend .. They have a braided brake line running to the front of the car from each rear drum. Any ideas or how too's would be great..
One more thing, I need to install trailer lights on my car, do I have to get the converter? Or is it not needed?
thanks...
steve
Central Florida Chapter is ALIVEEEEEEEEEEEEEEEEEEEE and KICKINGGGGGG

[my86gt]

you can adjust it from where the ebrake is on your center consoul. it will have a nut on it and all you have to do it tightned it and it should work.

[UBSTANG]

Ight man THANK you.. ive heard some many different ways i didnt know which way to go first.. thanks alot...

[Darren]

What Hugo said

[Larry03gt]

you can adjust it from where the ebrake is on your center consoul. it will have a nut on it and all you have to do it tightned it and it should work.


This is the right way to do it. :mick:

[UBSTANG]

ight everyone, thank you very much.. I should be tearing it down tonight.. thanks ill post up if it worked or not.. thanks again..

[BlKvNm]

Why didn't I ask this very question when I owned the LX....had to pull the thing all the way to engage...good stuff. :mick: