piller pod

[Chrajohns0]

got myself a piller gauge pod and wanting to know what gauges would be the bset ones. and actualy what gauges to use. oil pres, air fues, trans temp, h2o temp. what. its a 2 1\16 size. let me know what i should use.

Chris

[BlKvNm]

I would think it would depend on your set up...

air/fuel is a complete waste, although they are a cheap fill...the kids like the way it lights up though :P

[CopperPony]

unless its a wideband. Then its good.

Like Mick said though, it depends on your set up.

I have my digital tach/shift light and Trans temp in mine

I have my Fuel Press and Boost in the center a/c vent area

Oil/water/volts in the area below the stereo

[nmerrill]

Yea i have heard the a/f ratio's are pretty much a light show if not a wideband. Id go with water temp. I dont think the stocker is too accurate, and its always good to go with trans temp. I will be getting one of those soon

[CopperPony]

Speaking of gauges. I am working on a custom set up with a guy to mount gauges in the center ac vent. Once its done, I think it will be pretty cool. When its done, I post up pics and where you can get them.

[Chrajohns0]

what do you guys and gals use for gauges, brand names. oh and btw its a stock 95 gt. whats a wide band cost. they are high right? and one more thing. its a 3 pod.

[Chrajohns0]

unless its a wideband. Then its good.

Like Mick said though, it depends on your set up.

I have my digital tach/shift light and Trans temp in mine

I have my Fuel Press and Boost in the center a/c vent area

Oil/water/volts in the area below the stereo

got pics of your set up?

[CopperPony]

Autometer is the best. Stewart Warner is good too.

I use Phantom (white face, orange needle, black bezel) those and the ultralites are the least expensive.

For a wide band, if you dont need data logging, the Innovate LC-1 is hard to beat.
http://www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=149

You can also get it with a square display which is what I got for 20.00 less
http://www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=150

I just put it in the center of my factory instrument cluster so I can see it all the time.

If you need data logging, get the LM-1 of course its more expensive.
http://www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=146

Great quality and super easy install.

[CopperPony]

got pics of your set up?

I can get you some.

[91whitepony]

i use the phantom guages. go with the electrial instead of the mechanical they are a bit faster than mechanical.

[Chrajohns0]

i have been looking around. thinking of going with the h2o temp, oil pres., and ...... still thinking of the third one.

[91whitepony]

thats what i have oil press and water temp. btw i like the dancing girl!!

[white35th]

got myself a piller gauge pod and wanting to know what gauges would be the bset ones. and actualy what gauges to use. oil pres, air fues, trans temp, h2o temp. what. its a 2 1\16 size. let me know what i should use.

Chris
I have boost\ wideband air fuel\ intake air temp at the thot body.